Bathtub Reglazing Portland OR
Save up to 75% on remodeling costs compared to bathtub replacement. Serving Multnomah County homeowners with professional refinishing services backed by a 5-year warranty.
Portland homes see a lot of moisture, and over time that can be hard on bathtubs, showers, and bathroom surfaces. Whether you own an older home with a cast iron tub or a newer home with a fiberglass bathtub, replacement is not always the best or most cost-effective option. Bathroom Surface Solutions helps Portland homeowners restore worn, stained, chipped, or outdated bathtubs without the mess and expense of a full tear-out. Our bathtub refinishing process gives your existing tub a clean, smooth, high-gloss finish that can dramatically improve the look of your bathroom. If you are searching for a bathroom remodel near me, bath renovations, or bath remodeling contractors near me, refinishing may be the smarter first option to consider before replacing the entire tub.
BSS 7-Step Refinishing Process
1. Deep Cleaning & Stripping: Technicians thoroughly remove old caulk, soap scum, body oils, and mineral deposits using professional-grade cleaners and an acid wash.
​
2. Surface Repair: Chips, cracks, and scratches are filled and sanded level to ensure the base is completely smooth and flawless.
​
3. Masking & Ventilation Setup: The room is completely sealed with plastic sheeting and tape to protect walls and floors from overspray. They also set up an exhaust system to safely vent out chemical fumes and dust.
​
4. Epoxy Primer Application: They apply four coats of a high-build, high-bond epoxy primer. This ultra-grip layer ensures the new finish adheres perfectly to the old fixture.
​
5. Tacking: The fixture is carefully "tacked" (wiped down) to remove any airborne dust particles that may have settled on the primer.
​
6. Acrylic Urethane Topcoat: Technicians spray five coats of a premium acrylic urethane topcoat with a built-in clear coat, creating a highly durable, high-gloss finish.
​
7. Curing & Detailing: After the coating dries, the masking is removed, the area is carefully cleaned, and the fixture is re-caulked for a watertight seal.
Refinishing Built for Portland Bathrooms: Portland bathrooms deal with steady moisture, older plumbing, and a wide mix of housing styles. Surface preparation matters. Before we refinish a tub, we clean, repair, sand, mask, and prepare the surface so the new coating can bond properly. This is especially important in older Portland homes with cast iron tubs, clawfoot tubs, or years of mineral buildup. A good refinishing job starts long before the final coat is applied. Cost of Bathtub Refinishing vs. Replacement in Portland: Replacing a bathtub can quickly become a larger project than expected. Once the old tub comes out, homeowners often run into plumbing labor, disposal, tile repairs, drywall repairs, and several days or weeks of disruption. A full bathtub replacement can cost several thousand dollars depending on the home, plumbing, tile, and fixture selected. Refinishing is usually a fraction of that cost and is often completed much faster. For homeowners, landlords, and property managers, bathtub reglazing is one of the most practical ways to improve a bathroom without overbuilding the project.
We proudly serve homeowners throughout the Portland metro area including Pearl District, Laurelhurst, Alberta Arts District, Hawthorne, Sellwood-Moreland, Mt. Tabor, St. Johns, Division/Clinton, West Hills, and downtown Portland. Our technicians provide on-site estimates and flexible scheduling across Multnomah County and surrounding areas.
Our 10-Year Warranty & Care Instructions
At Bathroom Surface Solutions, we stand behind the quality of our craftsmanship and the durability of our top-of-the-line materials. That is why all of our residential bathtub, shower, and countertop refinishing services come backed by a comprehensive 10-Year Warranty against peeling or failure of adhesion.
​
To keep your newly refinished surface looking sparkling and smooth for years to come, please follow our simple care instructions: avoid using abrasive cleaners, bleach, or harsh chemicals. Instead, use mild, non-abrasive liquid cleaners and a soft sponge. Ensure bathmats are removed after each use to allow the surface to properly dry.
​
We are a fully licensed, bonded, and insured professional refinishing company.
​
We safely and proudly serve our local communities under Oregon CCB# 181883 and Washington L&I BATHRSS742K2.
Frequently Asked Questions
What is the standard color for bathtub reglazing?
Our standard colors are Kohler High Gloss White and Kohler Biscuit. Custom color matching is available for an additional $100 charge.
Can you refinish a clawfoot tub in my Portland home?
Yes. We refinish clawfoot tubs, cast iron tubs, porcelain tubs, fiberglass tubs, and acrylic tubs throughout the Portland area.
How long after refinishing until I can caulk the tub?
Caulking should not be installed until at least 20 hours after the refinishing work is completed. This helps protect the new finish and gives the surface proper time to cure.