Portland Shower Resurfacing & Enclosure Repair
Restore worn fiberglass, acrylic, and tile showers without the cost of full replacement. Serving Portland homeowners, rental properties, and condos with 5-year warranty protection.
Many Portland homes still have older fiberglass, acrylic, tile, or cultured marble showers that are structurally usable but visually worn out. Stains, discoloration, chips, cracking, and dull surfaces can make the entire bathroom feel dated. Bathroom Surface Solutions refinishes showers throughout Portland, giving homeowners a cleaner and more updated look without the cost and disruption of removing the entire shower system. If you are planning to update your bathroom with glass shower doors, shower enclosures, or custom shower enclosures, refinishing the existing shower walls or pan can be a smart way to complete the project without a full tear-out.
BSS 7-Step Refinishing Process
1. Deep Cleaning & Stripping: Technicians thoroughly remove old caulk, soap scum, body oils, and mineral deposits using professional-grade cleaners and an acid wash.
​
2. Surface Repair: Chips, cracks, and scratches are filled and sanded level to ensure the base is completely smooth and flawless.
​
3. Masking & Ventilation Setup: The room is completely sealed with plastic sheeting and tape to protect walls and floors from overspray. They also set up an exhaust system to safely vent out chemical fumes and dust.
​
4. Epoxy Primer Application: They apply four coats of a high-build, high-bond epoxy primer. This ultra-grip layer ensures the new finish adheres perfectly to the old fixture.
​
5. Tacking: The fixture is carefully "tacked" (wiped down) to remove any airborne dust particles that may have settled on the primer.
​
6. Acrylic Urethane Topcoat: Technicians spray five coats of a premium acrylic urethane topcoat with a built-in clear coat, creating a highly durable, high-gloss finish.
​
7. Curing & Detailing: After the coating dries, the masking is removed, the area is carefully cleaned, and the fixture is re-caulked for a watertight seal.
Shower Pan Repair and Surface Preparation: A shower refinishing project should begin with a close look at the condition of the shower pan and walls. If the floor is cracked, flexing, or weak, it may need reinforcement or repair before the surface is refinished. For certain fiberglass shower floors, we can address cracks and weak areas before applying the new finish. This helps improve the appearance and performance of the shower while avoiding unnecessary demolition when the base is still a good candidate for refinishing. Why Refinish Instead of Replace?: Replacing a shower can involve plumbing, demolition, waterproofing, tile work, permits, and days of construction. Refinishing is much less invasive. In many cases, the existing shower can be restored in place, saving time and money. This is especially helpful for rental properties, apartments, condos, and homeowners who want a cleaner bathroom without turning it into a major remodel.
Our shower refinishing crews work across Portland neighborhoods including Irvington, Richmond, Hosford-Abernethy, Kenton, Woodstock, and the Eastmoreland area. We also serve rental properties, condos, and apartment buildings throughout Multnomah County.
Our 10-Year Warranty & Care Instructions
At Bathroom Surface Solutions, we stand behind the quality of our craftsmanship and the durability of our top-of-the-line materials.
That is why all of our residential bathtub, shower, and countertop refinishing services come backed by a comprehensive 10-Year Warranty against peeling or failure of adhesion.
​
To keep your newly refinished surface looking sparkling and smooth for years to come, please follow our simple care instructions: avoid using abrasive cleaners, bleach, or harsh chemicals. Instead, use mild, non-abrasive liquid cleaners and a soft sponge. Ensure bathmats are removed after each use to allow the surface to properly dry.
​
We are a fully licensed, bonded, and insured professional refinishing company.
​
We safely and proudly serve our local communities under Oregon CCB# 181883 and Washington L&I BATHRSS742K2.
Frequently Asked Questions
Can you fix a cracked fiberglass shower floor?
In many cases, yes. If the shower floor is a good candidate for repair, we can reinforce and repair damaged areas before refinishing. If the damage is too severe, we will tell you replacement may be the better option.
How long before I can use my shower after refinishing?
Most showers can be used after the recommended cure time. We will provide exact aftercare instructions once the job is complete.
How do I clean my newly resurfaced shower?
Use a gentle, non-abrasive cleaner. Avoid S-O-S pads, bleach, ammonia, abrasive powders, and harsh scrubbing tools. We also recommend not washing pets in the shower to help prevent claw scratches.