

Most standard bathtubs cost $650 to $1,045 to refinish with Bathroom Surface Solutions. A fiberglass tub-and-shower combination typically costs $900 to $1,145, while larger showers and tub-and-tile combinations generally range from $900 to $1,495.
Those are realistic BSS price ranges—not a promotional starting price that applies only to a perfect tub. Your final price depends on the fixture's size and material, its condition, whether it has been refinished before, the repairs it needs, and the finish color you select.
Bathroom Surface Solutions sells refinishing, so we naturally believe in it when it is the right solution. We also know it is not right for every fixture or every homeowner. This guide explains the real costs, what you should expect for the price, and when spending more on replacement may be the better decision.
BSS refinishing prices for 2026
These are the typical published ranges for BSS projects in Oregon and Southwest Washington:
Surface
Typical BSS price range
Standard bathtub
$650–$1,045
Fiberglass tub-and-shower combination
$900–$1,145
Bathtub with tile surround
$1,000–$1,395
Tile shower
$900–$1,495
Fiberglass shower
$750–$1,145
Oversized jetted or soaking tub
$900–$1,395
Bathroom countertop
$300–$600
Kitchen countertop
$1,000–$1,695
These are ballpark ranges based on actual BSS work. An unusual scope, extensive repairs, access limitations, or multiple surfaces can move a project outside the listed range. BSS confirms the scope and fixed price before work begins.
You can use the BSS instant price calculator to establish a starting budget before requesting an estimate.

Is BSS more expensive than the average refinishing company?
Sometimes, yes.
Published cost guides do not all measure the same scope. Angi currently reports that many Portland bathtub-refinishing projects fall between $391 and $756, with an average near $565. Homewyse's broader 2026 estimate places basic professional bathtub refinishing between approximately $727 and $1,473, depending on location, site conditions, and project options.
BSS's standard range of $650 to $1,045 sits above some low local estimates and within the broader professional range. We are not trying to position BSS as the cheapest option. Our price reflects the preparation, coating process, repairs included in the written scope, licensed and insured operation, follow-up, and warranty coverage provided for qualifying projects.
That does not mean a lower estimate is automatically bad—or that the highest estimate is automatically best. It means buyers should compare what is actually included before comparing totals.
What should professional bathtub refinishing include?
A professional estimate should clearly explain the steps required for your particular surface. A typical BSS bathtub project may include:
Removing existing caulk around the refinishing area.
Cleaning away soap residue, oils, mineral deposits, and other contaminants.
Preparing the original surface so the coating can bond correctly.
Removing loose or failing material from a previous refinishing job when required.
Repairing ordinary chips, scratches, cracks, or surface defects included in the estimate.
Masking nearby walls, floors, fixtures, and other surfaces.
Applying the appropriate primer and topcoat system.
Allowing the finish to cure before caulking and first use.
Providing the project's written care and warranty terms.
The exact process depends on whether the fixture is porcelain, enameled cast iron, steel, acrylic, or fiberglass. Ask the estimator to identify the substrate and explain what preparation it requires.
Also confirm whether stripping, structural reinforcement, plumbing-fixture removal, caulking, return visits, and cleanup are included. A low quote can become expensive when necessary steps are omitted or treated as add-ons later.

The six biggest factors that affect refinishing cost
1. Fixture type and size
A standard five-foot bathtub generally requires less material, masking, and labor than a one-piece fiberglass tub-and-shower enclosure, oversized soaking tub, jetted tub, or complete tile surround.
More surface area usually means a higher price. Complicated shapes, built-in shelving, textured floors, and difficult access can also add preparation time.
2. Existing damage
Minor chips, scratches, worn areas, staining, and some repairable cracks can often be addressed before refinishing. Damage becomes more expensive when the fixture flexes, lacks support, has a large crack, or needs reinforcement beneath the floor.
Cosmetic damage and structural failure are not the same. A coating can restore a properly prepared surface, but it cannot correct hidden water damage, a badly warped fixture, rotten framing, or a tub that moves because it was installed incorrectly.
Clear photos are useful for an initial price range. Significant cracking, movement, or water damage should be evaluated before anyone promises a final price or recommends refinishing.
3. A previous refinishing coating
A failing old coating should not simply be covered with another one. Loose material must be removed and the underlying surface prepared again.
For a standard bathtub, required stripping is included within BSS's current $650 to $1,045 range. On fiberglass units, removing a previous coating generally adds $250 because the work requires additional labor and care.
Tell the estimator if the fixture has been refinished before. Peeling edges, brush or roller marks, excessive coating around the drain, or a different color visible beneath a chip can all indicate a prior coating.
4. Repairs and reinforcement
Ordinary surface repairs may be included in the quoted range, while weak-bottom reinforcement, significant fiberglass rebuilding, or unusual damage may be priced separately.
The important question is not simply, “Can this crack be covered?” It is, “What caused the crack, and will that cause still exist after the repair?” If movement or inadequate support caused the failure, that condition should be addressed before applying the final finish.
5. Standard or custom color
BSS's standard bathtub and shower colors are Kohler High Gloss White and Kohler Biscuit. Custom color matching currently adds $100.
A standard color is usually the simplest and most economical choice. A custom match may be worthwhile when the fixture must coordinate with existing tile, flooring, counters, or other finishes that will remain.
6. The contractor's process and accountability
Two proposals can both say “bathtub refinishing” while describing very different jobs. Pricing may reflect:
How much cleaning and surface preparation is performed.
Whether an old coating must be stripped.
Which repairs are included.
How the room is masked and ventilated.
The coating system and application process.
Whether the company is licensed, bonded, and insured.
Whether employees or temporary subcontractors perform the work.
How callbacks and touch-ups are handled.
Whether the warranty is written, transferable, prorated, or limited by exclusions.
Bathroom Surface Solutions is family-owned and has operated since 1979. It is licensed, bonded, and insured in Oregon and Washington under OR CCB #181883 and WA L&I BATHRSS742K2. Most qualifying projects receive a written 10-year warranty; the exact coverage, exclusions, and care requirements are provided with the estimate.
Why can one refinishing estimate be hundreds of dollars cheaper?
A lower price can come from lower overhead, a simpler scope, fewer repairs, less preparation, different materials, or reduced follow-up. None of those facts can be determined from the total alone.
Before accepting any estimate, ask these questions:
What surface do I have, and is it a good candidate for refinishing?
What preparation will you perform before applying the coating?
Is removing a failing previous coating included?
Which chips, cracks, weak areas, or other repairs are included?
Who handles plumbing hardware, caulking, masking, and cleanup?
How long must the fixture cure, and when can it safely return to use?
Which cleaners and bathmats should be avoided?
What does the written warranty cover and exclude?
What happens if I notice roughness, peeling, or another problem later?
Is the company appropriately licensed and insured for the work and location?
Requesting the same written scope from two or three providers makes the price comparison far more meaningful.
Refinishing versus a liner or full replacement
Refinishing is not the only option. A liner or replacement may fit some projects better.
Option
Current typical price information
Best fit
Main tradeoffs
BSS bathtub refinishing
$650–$1,045
Structurally serviceable tub with wear, staining, chips, repairable damage, or an outdated color
Temporary odor, curing time, care requirements, and no change to size or layout
Professionally installed tub liner
Angi reports approximately $2,681–$10,147, averaging about $6,394
Compatible tub where the buyer specifically wants a fitted acrylic shell
Higher cost, reduced interior space, limited compatibility, and seals that must remain maintained
Full bathtub replacement
This Old House reports approximately $1,400–$10,500 installed
Major structural or water damage, layout changes, accessibility needs, or a different fixture
Demolition, plumbing and finish work, multiple trades, longer downtime, and wider cost variation
These outside ranges are market estimates, not BSS quotes. Local labor, materials, fixture selection, plumbing, demolition, tile repair, permits, and hidden damage can substantially change replacement costs.
When is refinishing the wrong way to save money?
Refinishing may not be the best investment when:
The fixture has severe structural damage, extensive movement, or major warping.
Hidden water damage, mold, rot, plumbing, or subfloor problems must be opened and repaired.
You want to move the plumbing or change the bathroom layout.
You need a different tub size, depth, shape, or accessibility feature.
The existing fixture is uncomfortable or does not function for your household.
You do not want to follow curing and non-abrasive care requirements.
A larger remodel will soon remove the fixture anyway.
In those situations, replacement costs more upfront but can be the better long-term use of money.
When does refinishing usually offer the best value?
Refinishing is usually worth considering when the existing fixture is fundamentally serviceable and the main problems are cosmetic or repairable. Common examples include:
A durable cast-iron or steel tub with a worn, stained, chipped, or outdated surface.
A fiberglass unit with repairable damage and a floor that can be properly supported.
A rental or commercial bathroom that needs a faster turnaround than demolition allows.
A bathroom where the owner wants to preserve the existing tile, plumbing, and layout.
A unique or difficult-to-remove tub that would create extensive collateral work if replaced.
The value comes from avoiding demolition and preserving the parts of the bathroom that still work—not from pretending refinishing can solve every underlying problem.
How to get an accurate BSS price
Start with the 30-second BSS price calculator. Then submit clear photos showing:
The entire fixture and surrounding area.
The drain, overflow, plumbing fixtures, seams, and caulk.
Any chips, cracks, peeling, staining, soft areas, or movement.
Any evidence that the fixture was refinished previously.
BSS will confirm the surface condition, recommended scope, price, preparation responsibilities, expected downtime, and applicable warranty terms before the work begins.
If refinishing is not the right solution, the useful answer is not a cheaper coating—it is an honest recommendation to repair the underlying problem or replace the fixture.
Frequently asked questions
How much does it cost to refinish a standard bathtub with BSS?
Most standard bathtub projects cost $650 to $1,045. Condition, prior coatings, repairs, access, and color can affect the final price.
Is stripping an old finish included?
For standard bathtubs, required stripping is included within BSS's current $650–$1,045 range. Removing an old coating from a fiberglass unit generally adds $250.
Does a damaged tub automatically need to be replaced?
No. Many chips, scratches, cracks, and weak areas can be repaired. Severe structural failure, major warping, hidden water damage, or substantial movement may make replacement the better option.
How much does a custom color cost?
Custom color matching currently adds $100. Kohler High Gloss White and Kohler Biscuit are BSS's standard colors.
Are estimates free?
Yes. BSS offers a free online ballpark and free official estimate with no obligation.
How long will the project take?
Most standard projects are completed on-site in about a day, followed by the required curing and caulking period. Timing varies with the surface, repairs, temperature, humidity, and project scope. Do not use the fixture until BSS confirms it is ready.
Does every project receive a 10-year warranty?
No. Most qualifying projects receive a written 10-year warranty. Exact coverage, exclusions, commercial terms, and care requirements are provided with the estimate.
The bottom line
A standard BSS bathtub refinish usually costs $650 to $1,045. That is not always the lowest refinishing price available, but it is substantially less than many professionally installed liners or complete bathtub replacements.
The right decision depends on the fixture's condition and on what each proposal actually includes. Compare preparation, repairs, caulking, downtime, care requirements, licensing, follow-up, and written warranty—not only the headline number.
For a realistic starting range, use the BSS instant price calculator. If you want a final recommendation, upload photos or call 503-227-0826 for a free estimate.
